IN-SITU Dual Effect Studies for the Degradation of Phenazone Using Slurry and Fixed Bed Approach
Loading...
Files
Date
Authors
Charu
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The present study deals with heterogeneous photocatalytic, photo-Fenton and in-situ dual process
for the degradation of Phenazone in slurry and fixed-bed using TiO2 and waste foundry sand. The
degradation rate followed the first order rate kinetics with optimized condition for the
photocatalytic degradation of Phenazone TiO2 0.375g/L, H2O2 0.075g/L, C0
50mg/L at pH 5 with the wavelength 244 nm. Approximately 94% reduction in the
concentration of compound was observed after 3 hours. Present study focuses on use of
foundry sand as an iron source for the photo-Fenton treatment of Phenazone. Experiment was
performed in UV light to check the efficiency of the process. The degradation rate was
observed to follow first-order kinetics Foundary sand 1.0g/L, pH 3, H2O2 0.450g/L were
optimized conditions for obtaining the better degradation rates. Approximately 93%
reduction in the concentration of Phenazone was observed after 180 min. In-situ dual
treatment for the degradation of Phenazone was also carried out at optimized conditions for
slurry mode in sunlight TiO2 0.375g/L, H2O2 0.450g/L at pH 3. The percentage degradation
of Phenazone in natural sunlight as 95% was achieved in 90 min. The dual treatment is also
carried out in Fixed-bed reactor at optimised conditions H2O2 1.350g/L at pH 3 with 96%
reduction in the concentration of Phenazone was observed after 4 hours. The COD reduction
(75%) along with the generation of nitrite, nitrate confirmed the complete mineralization of
the selected compound. Fixed-bed studies were also carried out with TiO2 on Clay/F.S. disc
which eliminates the implication of slurry mode photocatalysis. The recyclability of catalyst
was confirmed by recycling the disc for at least 10 cycles and characterized by the
SEM/EDAX. Therefore, the technique visualized in this study by employing renewable
energy and durable catalyst can provide a viable solution to the industries for treating biorecalcitrant compounds.
