Development and application of bacterial cellulose as carrier and reinforcement material in self healing concrete
Loading...
Date
Authors
Supervisors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Concrete is one of the most widely used construction materials. However, the formation of
microcracks during service allows the ingress of water and aggressive substances, resulting in
deterioration and reduced durability. Microbially induced calcium carbonate precipitation (MICCP)
has emerged as a promising approach for developing self-healing concrete. However, the use of
Kombucha-derived bacterial cellulose (BC) as both a reinforcing material and a carrier for self-healing
bacteria remains relatively unexplored. The present study investigated the development and
application of bacterial cellulose as a carrier and reinforcement material in concrete.
Bacterial cellulose was produced through Kombucha fermentation using a sugar and tea-based
medium. The cellulose sheets were harvested, purified using 1 N NaOH, washed, dried at 55°C, and
processed into coarse fibres. The morphology and elemental composition of the produced BC were
characterized using Field Emission Scanning Electron Microscopy coupled with Energy Dispersive X
ray Spectroscopy (FE-SEM-EDX), while its crystalline structure was analysed using X-ray diffraction
(XRD). The BC was subsequently incorporated into concrete at 0.3%, 0.5%, and 0.7% of cement
weight. In addition, Bacillus megaterium SS3 was immobilized onto BC fibres using a bacterial
suspension of 5 CFU/mL for 2 h, and the bacteria-loaded fibres were incorporated into concrete at
the same concentrations. Concrete cube specimens were prepared and cured in nutrient broth.
Compressive strength was evaluated at 7 and 28 days, while water absorption was evaluated after 28
days.
FE-SEM analysis revealed a distinct interconnected three-dimensional fibrous network with visible
pores and spaces characteristic of bacterial cellulose. EDX analysis showed carbon and oxygen as the
major elements, with average mass percentages of 66.64% and 27.47%, respectively. XRD analysis
showed characteristic peaks at approximately 14.5°, 16.7°, and 22.6°, consistent with the crystalline
Cellulose I structure. Among the concrete formulations, 0.3% bacteria-loaded BC exhibited the
highest compressive strength, reaching 21.56 MPa at 7 days and 35.75 MPa at 28 days, compared
with 18.48 MPa and 28.83 MPa, respectively, for the control. Increasing BC concentration beyond
0.3% did not result in further improvement in compressive strength. Water absorption was 4.45% for
the control, while bacteria-loaded BC specimens showed lower values of 3.58%, 3.62%, and 3.80% at
0.3%, 0.5%, and 0.7% BC, respectively. The 0.3% bacteria-loaded BC specimen showed approximately
19.6% lower water absorption than the control.
Overall, the findings demonstrate the potential of Kombucha-derived bacterial cellulose as a
multifunctional material for concrete, providing reinforcement potential while serving as a carrier for
self-healing bacteria. The 0.3% bacteria-loaded BC formulation showed the most favourable
combination of compressive strength and water absorption among the formulations investigated.
However, direct evaluation of crack healing, microscopic confirmation of calcium carbonate
precipitation, bacterial viability after incorporation, and long-term durability are required to establish
the self-healing performance of the developed system more comprehensively.
